FREE shipping on orders over $199

 Checkout
Dual LiPo 4500 11.1v Phantom RTR Kit

Dual LiPo 4500 11.1v Phantom RTR Kit

List Price: $269.99
You save $40.00
Price: $229.99
Quantity:
Add to cart
 
Kit includes everything you need to fly two packs on your DJI Phantom or Phantom FC40!

Lipo 4500 3-cell 11.1v Phantom Pair

This upgrade for the DJI Phantom and Phantom FC40 Quadcopter will greatly improve your flight time.

Two LiPo 2250mah - 11.1v packs

  • 4500mah capacity(two 2250mah packs)
  • 3S 11.1 volts
  • True 100C rating
  • Lifetime warranty
  • 5C fast charge capable
  • 100% waterproof
  • Built today with factory fresh cells
  • Built with genuine 16awg Deans Ultra wire
  • We add the XT60 connector and JST-XH balancing tap for you
  • 100mm x 35mm x 24mm, 170g

By using these packs in parallel, you will be running a 4500 11.1v setup.  This will double your flight time.

Do NOT run these packs in series when using them in the DJI Phantom or you will damage your system.  They are only to be run in parallel which doubles the capacity instead of the voltage.

Note: This pack is built with the stock plugs shown in the picture for easy plug and play.  If you need a different plug or balancing tap, please mention it in the notes section when checking out.

Note: This battery pair is designed to work with the Phantom 1 and Phantom FC40 but can be used for the Phantom 2 series if you are running our unlocked cap system.

Hitec X1 AC Plus Single Port Charger

The new X1 AC Plus battery charger goes everywhere you go.  Capable of charging all battery types, this charger is the affordable and portable answer to keeping your batteries charged and ready for action.  The 50-watt X1 AC Plus will charge all your batteries at rates from 0.1 to 6 amps, using either 11-18V DC or 100-240V AC power sources.  Designed to charge NiMH, NiCd, LiPo, LiFe, Li-Ion and Lead-based batteries, the X1 AC Plus is the perfect charging solution for your RC hobby.  Drivers and piolts alike will appreciate its price and relish in its dependability.

Charge your batteries safely and efficiently with this simple to use system.  You can charge in AC mode by plugging into a wall outlet or you can charge in DC mode by attaching it to a 12-volt car battery or a 11-18 volt (20A minimum) DC power supply.

  • Charge 1-6 LiPo, LiFePO4/A123, Li-ion, 1-15 NiMH/NiCd, 2-20V Lead Acid batteries
  • Up to 6 amp charge rate(50W)
  • 11-18V DC or 100-240V AC
  • 1-year guarantee

Included Accessories:

1 - Charge Lead matching battery pack in kit

1 - Tamiya Large Male Charge Lead

1 - Battery Balance Board w/ cable (JST-XH type)

1 - AC Power Cord

1 - DC Power Cord

Fire resistant Lipo Sack 9" X 12"

Use this fire resistant product while charging, storing or transporting a lipo battery pack. The use of a Lipo Sack does not guarantee protection of surrounding surfaces. It is simply intended to mitigate the effects of a battery failure during charging or after a crash. MaxAmps takes no responsibility for effectiveness of the Lipo Sack. Never charge unattended. Always keep your lipo packs in a fireproof container in addition to the Lipo Sack.

FREE REPLACEMENT GUARANTEE

Avoid damage to the Lipo Sack. Replace if it becomes ripped, worn or is involved in a battery failure.

If your Lipo Sack is involved in a failure resulting in a venting of the battery and fire return it to us with a statement of the circumstances and receive a replacement Lipo Sack free of charge!

XT60 Parallel Adapter for Phantom

This adapter will work perfectly when flying two packs at once in the DJI Phantom or Phantom FC40 Quadcopter.  By using this adapter you will double the capacity(flight-time) of your setup, NOT the voltage.

For example, if you have two 2250 11.1V packs, you would now have a 4500 11.1V setup.

Built with 16awg Deans Ultra wire.

Dual Battery Tray Kit for Phantom

Kit includes:

  • 2 - Battery trays
  • 8 - 10mm Screws(to replace existing screws)
  • 4 - 8" Velcro straps(not pictured)

Specs/features:

  • Made of strong durable ABS Plastic
  • Easy installation
  • Slotted for velcro straps to ensure battery security during flight
  • Only 3mm thick to allow for a seamless fit
  • Weight = 21g each

Links to product upgrade options:

Hyperion 0720iNET3 AC/DC Charger

Lipo Sack Plus 13" x 18"

 
18 Product Reviews - Average rating 5 / 5 (Show All)

Click to review this product

Perfect Choice

- November 21st 2016

I purchased two of these 2250 batteries for an E Flite Timber. This was the perfect choice! They have incredibly low RI and virtually no sag using full throttle. I have purchased many batteries from Max Amps and will continue to do so in the future. These...

Speed sick

- November 18th 2016

I pick up two packs of 3s 2250mah nice fit an can't ask for any better thanks again my sore buggy fly's on wheel's five stars.

Awesome battery

- November 05th 2016

Fit perfect in my DNA 200 B box, great battery.
Very fast shipping. The customer service is outstanding! I even got a thank you card after I received the battery!!!
I will definitely order here again for my next project!!!


Solid Battery

- June 15th 2016

Small for the capacity and current rating. Fits perfectly in my B box mod and lasts me almost all day.

BAD ASS FOR DNA200

- May 25th 2016

This battery lasts me from 6am to 10pm @ 90-100watts in my custom build dna200. I have another with the 1850 and this battery seems to last almost twice as long. Not sure why but when i charge it it always shows higher than 2250mah. Love this thing:-)

Top of the ling quality, exceptional price.

- March 22nd 2016

Use this bad boy in my LiPo PWM box mod. Can vape over 1,000 watts with this beast and the battery has sublime craftsmanship.

Click to review this product

Information

Directory

Orders

 

 

Accepted Credit Cards