Use this adapter to connect two LiPo packs with 10awg 6.5mm female plugs in series.  This adapter increases your voltage(power) when combining two packs.  Built with high-grade 10awg wire.  Popular for the HPI Baja electric conversions.

This adapter increases your capacity(run time) when combining two packs.  Built with 12awg Deans Ultra wire.

This adapter increases your voltage(power) when combining two packs.  Built with 12awg Deans Ultra wire.

This adapter increases your voltage(power) when combining two packs.  Built with 12awg Deans Ultra wire.

This adapter is only to be used for Lipo or Life packs in the new Traxxas 1/16 Slash and E-Revo VXL trucks.  By using this adapter you will double the capacity(runtime) of your setup, NOT the voltage.

This adapter is only to be used with NIMH packs or 2S Life packs, NOT Lipo packs, in the new Traxxas 1/16 Slash and E-Revo VXL trucks.  By using this adapter you will double the voltage.

This adapter is only to be used for Lipo or Life packs in the new Traxxas 1/16 Slash and E-Revo VXL trucks.  By using this adapter you will double the capacity(runtime) of your setup, NOT the voltage.

This adapter is only to be used with NIMH packs or 2S Life packs, NOT Lipo packs, in the new Traxxas 1/16 Slash and E-Revo VXL trucks.  By using this adapter you will double the voltage.

Adapter for the Hyperion LBA10 Balancer or any Hyperion EOS06XXi Charger. Balance your 2S lipo packs that require the 2mm Gold connector balancing port.

Temperature Sensor can be used for any Hyperion Charger with a Temp Sensor port.

Save time and charge up to six packs at once!  Six-port parallel charge adapter for 1S lipos like our 150mah packs for ultra-micro helicopters.

Adapter for the Hyperion EOS0720iXX Balance Chargers ONLY. Not to be used with any other Hyperion Chargers. Balance your 2S to 7S lipo packs with the Hyperion style taps via one harness!

Adapter for the Hyperion EOS0720iXX Balance Chargers ONLY. Not to be used with any other Hyperion Chargers. Balance your 2S to 7S lipo packs with the Align/JST-XH style taps via one harness!

Adapter for the Hyperion EOS0720iXX Balance Chargers ONLY. Not to be used with any other Hyperion Chargers. Balance your 2S to 7S lipo packs with the Kokam style taps via one harness!

Adapter for the Hyperion EOS0720iXX Balance Chargers ONLY. Not to be used with any other Hyperion Chargers. Balance your 2S to 7S lipo packs with the Thunder Power style taps via one harness!

The battery expansion kit from Traxxas allows the installation of larger format battery packs into the Velineon powered Rustler VXL, Bandit VXL, and Stampede VXL.

These extended quick release battery hold downs for the E-maxx allow for lipo packs up to 28mm tall to fit in the battery tray.

This extended battery hold down for the Slash or Slash 4x4 allows for lipo packs up to 42mm tall to fit in the battery tray.

This extended battery hold down is for the Stampede 4x4 only.  It allows for lipo packs up to 42mm tall to fit in the battery tray.

Battery hold-downs, tall (2) (allows for installation of taller, multi-cell batteries)

Two male and two female connectors rated to handle 200 amps.  They will work great for any brushless Monster Truck, 1/8 or 1/5 scale vehicle.

Adapter for any Hyperion EOS06XXi Balance Charger. Balance your 2S to 6S lipo packs with the FMA Cellpro style taps via one harness!

Note: This adapter is NOT for use with Hyperion EOS0720i chargers.

Adapter for any Hyperion EOS06XXi Balance Charger. Balance your 2S to 6S lipo packs with the Hyperion style taps via one harness!

Note: This adapter is NOT for use with Hyperion EOS0720i chargers.

Adapter for any Hyperion EOS06XXi Balance Charger. Balance your 2S to 6S lipo packs with the Align/JST-XH style taps via one harness!

Note: This adapter is NOT for use with Hyperion EOS0720i chargers.

Adapter for any Hyperion EOS06XXi Balance Charger. Balance your 2S to 6S lipo packs with the Thunder Power style taps via one harness!

Note: This adapter is NOT for use with Hyperion EOS0720i chargers.

Two-piece receiver and battery hold down for Stampede & Stampede VXL.  You must purchase this kit in addition to Kit #3725X to convert your Stampede truck.  This does not work with the Stampede 4x4 VXL.  You must purchase Kit #6727X for the Stampede 4x4 VXL.

This adapter is only to be used when running a single battery pack on an ESC that has two output plugs like the HPI Vorza.  Adapter coverts the two plugs coming off your ESC to a single plug for your pack.

Cable for networking two EOS0610i or EOS0720i Chargers together.  This allows you to balance charge 2 packs at once up to 14S.

Battery pack side plug for newer JR and Spektrum radios.

Two Male and Two Female Connectors

Note: These come in pairs because you install one male on the positive and one male on the negative ESC leads. Same goes for the female side on the battery pack leads.

This set comes with two 4mm gold banana plugs attached to 14awg wire(one positive and one negative).  You have the option of us adding a plug to the opposite end for you so that you don't have to do it yourself.

DataPort Cable for connecting LBA10 Balancer to compatible Hyperion Chargers, in order to view individual cell voltages during the charge process.

Set for Networking two LBA10 Balancers together, for balance charging two packs as one up to 12S. Includes Network Cable (for NET PORT) and one 4mm Female-Female adapter to serial-connect LBA10 Input leads together.

Battery hold-down retainer, tall (2) (allows for installation of taller, multi-cell batteries)

This is a replacement harness for your Hyperion EOS0720i charger in case yours becomes lost or damaged.  It connects your 2S-7S adapter board to the charger.

This is a replacement harness for your Hyperion EOS06XXi charger in case yours becomes lost or damaged.  It connects your 2S-6S adapter board to the charger.

Use with 4S & 5S packs for Thunder Power balancers.

Use with 2S & 3S packs for Thunder Power balancers.

Designed for many popular models including; Slow and Park Flyers and 1/18 scale Micro cars, the Micro Series replaces the 1000 Series connector line.

Perfect for Sub C size cells.