LiPo 6500 11.1v Rustler VXL Brushless RTR Kit (Back to product)

Home » RTR LiPo Kits     (Enlarge)     LiPo 6500 11.1v Rustler VXL Brushless RTR Kit List Price: $329.99 Price: $259.99 Charger Upgrade: Please Select...No Upgrade Hyperion 0720iNET3 AC/DC Charger Upgrade(save $10) (+$40.00) Hitec X4 AC Plus 4-Port AC/DC Charger Upgrade(save $20) (+$100.00) Lipo Sack Upgrade: Please Select...Lipo Sack 9" x 12"(standard) Lipo Sack Plus 13" x 18" Upgrade (+$10.00) Hard Case: Please Select...Shrink Wrap Only(standard) Built in Skin (Shrunk into Pack) (+$4.99) Hard Case (+$9.99) Battery Tray Expansion Kit: Please Select...No Expansion Kit (standard) Rustler VXL Expansion Kit #3725X (+$6.99) Quantity: « Previous | Next »   Kit includes everything you need to make your Traxxas Rustler VXL go 70+mph! Lipo 6500 3-cell 11.1v Pack 3-year 300-cycle guarantee 70+mph in Rustler VXL(11.1 volts) 39 minutes average run time(6500mah capacity) True 150C rating 5C fast charge capable 100% waterproof Built today with factory fresh cells Built with genuine 12awg Deans Ultra wire We add the connectors and balancing taps for you 138mm x 45mm x 36mm, 483g Using this battery pack in the Rustler VXL requires Traxxas battery tray expansion kits #3725X.  You may add one by selecting it from the drop down menu on this product. Hyperion EOS0606i AC/DC Balance Charger Charges NIMH, NICD, Lipo & A123 1-14 NIMH-NICD, 1-6 Lipo, 1-6 A123 cells Up to 6 amp charge rate 11-15V DC or 110-240V AC Comes with Integrated LBA Balancer Includes Hyperion and Align/JST-XH 2S-6S Multi-Adapter Comes with a data port 50 watt max(not great for high-capacity 4S-6S packs)  This charger balances your pack while it's charging.   Of course, the AC/DC part means that you can charge directly from an AC wall supply or from a 12V DC battery/power supply.   Charge and Discharge modes (and cycling for NIMH and NICD) Lipo Storage mode(Allows fast and simple discharge to 60% capacity for proper storage which equals longer battery life) Clear and easy to read LCD screen with warnings for common setup errors. Fire resistant Lipo Sack 9" X 12" Use this fire resistant product while charging, storing or transporting a lipo battery pack. The use of a Lipo Sack does not guarantee protection of surrounding surfaces. It is simply intended to mitigate the effects of a battery failure during charging or after a crash. MaxAmps takes no responsibility for effectiveness of the Lipo Sack. Never charge unattended. Always keep your lipo packs in a fireproof container in addition to the Lipo Sack. FREE REPLACEMENT GUARANTEE Avoid damage to the Lipo Sack. Replace if it becomes ripped, worn or is involved in a battery failure. If your Lipo Sack is involved in a failure resulting in a venting of the battery and fire return it to us with a statement of the circumstances and receive a replacement Lipo Sack free of charge!

Average Rating: (of 1 votes)

by Brian Miles Date Added: 2011-02-13 21:47:13

I did a lot of looking around before finally settling in on the Max Amps 3s/6500 mAh batter and the Hyperion net3 charger combo. It arrived quickly, very well packed and has worked perfectly ever since. It's almost scary the power these batteries pack! Great customer service from start to finish and a hand written Thank You note to boot. Rating: [5 of 5 Stars!]